Rialto veneziano is an acrylic colored spatula stucco for interiors. This prestigious finish distinguishes itself for its transparency of tones and brightness of surfaces. These characteristics ensure that the walls acquire as well as the color, light and depth that give value to the structure. To obtain this three dimensional effect we must use the white basecoat Rialto veneziano sottofondo. This ready to use acrylic product in paste is the ideal base for a perfect result both in terms of finish adhesion, and fineness of the surface. To apply the first coat of Rialto veneziano sottofondo we will use the stainless-steel trowel, it should be sharp with rounded corners. On the properly prepared wall, we distribute the product in a homogeneous way. After an interval of 4-6 hours we check the evenness of the surface. Possible defects can be eliminated with a light hand sanding with 220 grit sandpaper. This basecoat is rich in easily sanding fine talc therefore light pressure is enough to fix the imperfections. Using the same technique, we apply a second coat, always making sure that there are no defects on the dry wall. This way we will achieve a white wall, fine and perfectly smooth, ready for the application of Veneziano colored stucco. Finally we inspect the result, a raking light can simplify the inspecting process by highlighting the smaller defects. We are now ready to apply Veneziano finish. Here we use a cleaned sharp set of spatulas with rounded corners. Use small quantities of product leaving ample spaces among the strokes, that we will eventually close. We apply and remove the color avoiding any material excesses, making sure to constantly change up the spatula angle. Every 6-8 applications we will polish using a spatula to further smooth the product. We constantly vary the angle of the tool to achieve a pleasant and uniform final effect. With a third and final coat, we define the final aspect of this thrilling finish unique for its depth and brightness. The last phase of smoothing is made by spatula. The final polish revives the color and makes the surface particularly shiny. We proceed by hand applying a certain pressure. Its contents of special acrylic resins and very fine talc favor the polish without the necessity to use waxes or superficial treatments. Wishing to increase the shining and to get a mirror surface, we finely sand with sand paper 1200. We use the dry paper with circular and uniform movements. The same dust produced by the product will contribute to improve the slide of the paper promoting the polishing. Having completed the wall, we remove the residues with a soft cloth. Veneziano finish will allow you to realize prestigious and unique decorations of deep, vibrant and shining colors.

Be the first to comment