How to Install a Touchless Kitchen Faucet | Ask This Old House

submitted by JodysBakery on 04/12/22 1

Plumbing and heating expert Richard Trethewey helps a homeowner install a new, no-touch kitchen faucet. (See below for a shopping list, tools, and steps.) SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse Shopping List for How to Install a Touchless Kitchen Faucet: - Touchless kitchen faucet - Small bucket, used to collect water Tools List for How to Install a Touchless Kitchen Faucet: - Basin wrench, for disconnecting water-supply lines from sink - Screwdriver - Cordless drill Steps for How to Install a Touchless Kitchen Faucet: 1. Close the hot- and cold-water shutoff valves underneath the sink. 2. Use a basin wrench to disconnect both water-supply lines from the underside of the sink. 3. Twist off the hand sprayer from the spray hose, then pry off the retainer clip with a narrow screwdriver or a pocketknife. 4. Pull the sprayer base off of the spray hose, then push the hose down through the sink deck and into the cabinet below. 5. Drain the water from the spray hose into a bucket. 6. Pull out and discard the old faucet. 7. Place the new faucet's mounting plate and gasket onto the sink deck. 8. Set the faucet in place by feeding its hoses and data cable down through the hole in the mounting plate. 9. From below, slide the ends of the hoses and cable through the support bar and mounting washer. 10. Thread on the hex nut and tighten with the supplied wrench to lock the faucet to the sink. 11. Feed the soap dispenser through the old hand-sprayer hole in the sink deck, then tighten the mounting nut from below. 12. Push the retractable spray hose into the gooseneck faucet and down into the cabinet. 13. Fasten the battery-powered control box to the inside of the cabinet with two screws. 14. Plug the water-supply lines, power line, and data cable into the push-to-connect fittings along the top and bottom of the control box. 15. Install the control-box battery, then adjust the water-temperature setting. 16. Snap the counterbalance weight onto the hose that's connected to the retractable faucet spray head. 17. Open the shutoff valves, then test the faucet. About Ask This Old House TV: Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook. Looking for more step by step guidance on how to complete projects around the house? Join This Old House INSIDER to stream over 1,000 episodes commercial-free: bit.ly/2GPiYbH Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: bit.ly/34RYEP5   Follow This Old House and Ask This Old House: Facebook: bit.ly/ThisOldHouseFB Twitter: bit.ly/ThisOldHouseTwitter bit.ly/AskTOHTwitter Pinterest: bit.ly/ThisOldHousePinterest Instagram: bit.ly/ThisOldHouseIG bit.ly/AskTOHIG For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldHouseWebsite How to Install a Touchless Kitchen Faucet | Ask This Old House www.youtube.com/user/thisoldhouse/

Leave a comment

Be the first to comment

Email
Message
×
Embed video on a website or blog
Width
px
Height
px
×
Join Huzzaz
Start collecting all your favorite videos
×
Log in
Join Huzzaz

facebook login
×
Retrieve username and password
Name
Enter your email address to retrieve your username and password
(Check your spam folder if you don't find it in your inbox)

×