How to Choose Your CRC BRAKLEEN Brake Parts CleanerCRC BRAKLEEN, the #1 brake parts cleaner brand, is simplifying a complex category. How do you know which CRC BRAKLEEN is right for your business? Red = Chlorinated, Non-Flammable & Strongest Formula. Green = Non-Chlorinated, with 7 Unique Formulas to meet your state's regulations. Our less-than-10% VOC formulas are changing from red to green. New color, same trusted product!
BRAKLEEN Pro Series Commercial
CRC BRAKLEEN® Brake Parts Cleaner Instructional VideoPart of doing a brake job right is making sure that all brake surfaces and components are clean. Brakleen brake parts cleaner, from CRC Industries, quickly and easily removes brake dust, grease, oil and road grime. The original aerosol brake parts cleaner; Brakleen has been the number one choice of automotive technicians and do-it-yourselfers for more than 40 years. CRC Brakleen is easy to use and does most of the work for you!
Simply wet down the surfaces that need cleaning by spraying in short bursts at a distance of roughly 18 to 24 inches. Make sure to avoid getting overspray on plastic, rubber or painted surfaces. After all surfaces are wetted, continue spraying to remove contaminants. Use a wire brush to clean the caliper housing and backing plate to remove all dirt and dust. Let the parts air dry after an application, or wipe down with a clean rag. It’s possible that heavy deposits of grime may require a repeat application.
The chlorinated formula in the red can is the most powerful Brakleen available. CRC also offers multiple Brakleen formula options to meet any state regulations and requirements. If you’re installing new brakes, Brakleen can also be used on the new rotors to remove the protective oil they use in packaging.
Use CRC Brakleen on rotors, hub and rotor contact points, on the caliper assemblies, brake linings, cylinders, drums, CV joints, clutches, springs, bolts, fasteners and all brake hardware. Once all your brake parts are clean and new parts are installed, apply Silaramic Brake System Grease from CRC. It protects all moving caliper hardware and backing plates and any mating surfaces from dirt and corrosion.
Be sure to use CRC Brakleen Brake Parts Cleaner is the product preferred by automotive techs, for a brake job done right!
Find more product information at http://crcindustries.com
CRC SILARAMIC Brake System GreaseNow available from the makers of CRC BRAKLEEN Brake Parts Cleaner, CRC SILARAMIC Brake System Grease! CRC SILARAMIC (05361) is a pure silicone dry-film lubricant fortified with a high concentration of a unique ceramic lubricant. SILARAMIC allows brake parts to move freely and protects brake systems under the most extreme conditions and braking temperatures. SILARAMIC is recommended for all brakes, including high performance and ceramic brakes. Louis Fresta, CRC vice president of Sales and Marketing, says "Our team of technology experts has developed a superior product that outperforms ordinary caliper and brake system greases and is engineered to last the life of the brake pads and prevent uneven pad wear. This is a hard-core, high-performance grease."
How to Perform a Complete Brake Job using CRC ProductsJason Marks, crew chief for BimmerWorld racing and Ryan Kuhn, team technician, detail the importance of performing a proper brake job and show how they use CRC products for each step of the job. See how BimmerWorld depends on the brake experts at CRC for quality performance every time. We want to thank Jonathan Sargent of RGBtv (Edit/Design), Steve Kahn from Edit On Hudson (Shoot) and James Clay, Jason Marks and Ryan Kuhn from BimmerWorld for helping us pull together this awesome brake service video in time for AAPEX. GREAT JOB GUYS!! Check it out!
CRC BRAKLEEN Brake Parts Cleaner Commercial on SPEED Channel TVCRC BRAKLEEN, the ORIGINAL aerosol brake parts cleaner, is featured in a new commercial on the SPEED network shows TWO GUYS GARAGE and TRUCK U. BRAKLEEN was the very first product of its kind, and for 40+ years, hundreds of thousands or technicians and Do-It-Yourselfers have relied on BRAKLEEN and CRC products for fast and effective automotive service solutions.
CRC BRAKLEEN Tech Tip on SPEED Two Guys GarageAs seen on Two Guys Garage on the SPEED channel: When doing a brake job it's important to keep the many brake surfaces and components clean. CRC BRAKLEEN Brake Parts Cleaner chlorinated formula in the red can is the strongest available to remove brake dust, road grime, and grease. Use CRC BRAKLEEN on the caliper assembly and bolts and on the new rotor before you install to get rid of the protective oil used for shipping. CRC BRAKLEEN is available in 6 different formulas to meet different state requirements.
CRC SILARAMIC Brake System Grease Tech Tip on SPEED Two Guys GarageAs seen on Two Guys Garage on the SPEED channel: Not all new brake pads sold today include new hardware, but these parts wear down just like your pads do and need to be replaced. The caliper sliders keep the brake pad in place when sitting in the caliper. One tip when you're installing your new hardware. Use CRC SILARAMIC Brake System Grease to protect all moving caliper hardware including backing plates and any mating surfaces. This will prevent rust and oxidation, and the anti-wear additives help protect against brake friction and corrosion. CRC SILARAMIC is made up of a pure silicone dry film lubricant that allows brake parts to move freely under the most aggressive braking situations. You can also use SILARAMIC on high temperature ceramic brakes because it withstands temps up to 3,000 degrees Fahrenheit. Once the brakes are secure, pump the brakes 2 or 3 times and the brakes should feel nice and firm.
CRC SILARAMIC® Brake System Grease Instructional VideoTo be certain that your brakes are functioning properly, it’s important to maintain and clean all brake surfaces and components and make sure that they stay dirt and grime free. After using CRC Brakleen Brake Parts Cleaner, the original aerosol brake parts cleaner, it is recommended to apply Silaramic Brake System Grease from CRC to protect critical brake system components. Use Silaramic on all moving caliper hardware, backing plates and any mating surfaces. It protects these components from dirt and corrosion, extending parts life and improving performance.
After using CRC Brakleen to clean the caliper housing and backing plate to remove all grime and dust, apply CRC Silaramic Brake System Grease, then remove any excess grease. Be careful to avoid getting the lubricant on pads and rotors. Silaramic is for all brake systems and brake components such as calipers, bushings, holes, pins, inserts, anchors, bolts and boots.
Silaramic is a ceramic fortified, pure silicone dry-film lubricant. It outperforms ordinary caliper and brake system greases, withstanding extreme temperatures up to 3000°F. Silaramic helps prevent uneven pad wear and, is engineered to last the life of your brake pads. It protects brake systems under the harshest of conditions and temperatures.
Use Silaramic Brake System Grease from CRC Industries to help protect critical brake system components from heat, friction and corrosion!
Find more product information at http://crcindustries.com
